Building Skinktown (part 2)

I have now finished the buildings at the front, as these views show, they just need painting.

Construction was just the same as before for the rectangular buildings. The painted building in the centre of the lower image was made from a plastic container that some tennis balls were sold it, with half a ping pong ball stuck on top, with some carbon strips added. It was originally built free-standing, which is why it is already painted. I also cut it down in size to fit the scene.

The domed tower at the right of the upper image is a cardboard tube with half a ping pong ball on top, whilst the dome on the building beside it was cut from a polystyrene ball (packed of these can purchased from Amazon for not too much).

The building to the left of that was built from a plastic wine glass with the base removed, and a small ball on top.

Next stage will be painting...

Building Skinktown (part 1)

I am building a diorama for Warhammer figures; Skinktown. The building style will be part Moroccan, part Tattooine. It is designed so it could be used as a backdrop to a battle, on a 2' by 1' board, with a road in the centre to fit the existing battleboards. Eventually I will build a second one to go beside it, so we can have a 4' by 5' battlefield.

The basic form, then is a 2' by 1' board, 4mm plywood, just like the other boards, but with a similar vertical piece.

The shape of the land is formed with expanded polystyene, glued down with a hot glue gun. The plan is a road across the back, jumping a ravine on a bridge, with a second road descending from the left to the centre.

So there are two rows of buildings, those at the back in low relief. I built some rough prototypes of the building at the front to get in idea of how it would look, then started on the buildings at the back.

This one will go at the left, and is built of corrugated card from an old box. You can see how it has been cut to allow for the landscape at the right.

Here it is at a later stage, with an addition at the top right. Windows and doors have lintels (card from a cereal packet), the windows have meshes over them and the door is in place.

To give the walls texture, I painted on PVA glue and then liberally sprinkled on talc (I also filled in gaps in the corrugated card as much as possible too). Then the buildings were glued in place.

By the way, the sky was painted blue using a small roller; it gives a much more even finish than a brush; very important for sky.

In this image you can also see two of the prototypes for the foreground buildings.

Then I filled in gaps between the buildings with plaster. I used ready mixed plaster, a tub is only a pound from Poundland. Then it is all painted with white primer (the stuff you use on wood when decorating the house; it is relatively cheap and goes on any surface).

That is it so far. Next I will work on the building at the front.

A battlefield

We now have a battlefield!

The tiles and features have been described in previous posts. Each board is 2' square, and there are six laid out, though you can only see four properly.

Here is a battle in progress, ogres versus Seraphon.

We use the SCGT point system to ensure more-or-less equal sides. Ogres won!

Building a battlefield

Starting to get a proper battlefield built here are a couple of images. The first is a simple hill. It is built from foamboard insulation, 5 cm thick. It is not nice stuff to work with; use in a well-ventilated area away from children. The rocks are bits of expanded polystyrene glues on. The slope and rocks are covered in plaster, the whole thing painted with primer paint.

The rocks wre painted with dilute black poster paint, which runs into the cracks to highlight the shadows. The rest was painted with green poster paint. I then spread sawdust, dyed with the same poster paint, over the top, glued with PVA.

The feature on the left is removable, and is the muck sponges mentioned in an earlier post.

This second board was made pretty much the same way, but with some bridge supports added (more foamboard with the sides covered in plaster). The stairs are just formed into the plaster, and the road is just black paint. The empty circle front right is where a scenery feature can be places.

Some progress

We put Papier-mâché on the first river boardand it now looks like this.

Only one layer so far, but we plan to do four. It took a long time to dry, and I think that caused the wood to warp a little, so one corner is about half an inch higher. I have since attached braces on all the sides:

Hopefully this will straighten it out (possible with some damping of the underside). Once the Papier-mâché is done, the screws can be removed, and the holes filled in with plaster. Well that is the plan anyway.

I am also building this "Tower of the Inferno". The golden orb is a Christmas decoration, and there is a piece of wood in the core of the tower to give it strength, the rest is card from cereal packers.

Last post I had been experimenting with clay; I am having reservations now. The clay strinks significantly on drying, and if it is on some kind of armature or attached to a base, it cracks. I will continue to play around with it, but it is not as useful as I was hoping.

So war-gaming...

My daughter is suddenly into Warhammer. I am not so much into the war gaming, but I do enjoy modelling, and have my own model railway.

So this weekend we started to build some battle boards and scenery.

Battle boards

The battle boards are 4mm plywood. I purchased them from a local timber merchant, as 4' by 8' sheets, and they cut them into 2' by 2' squares. They were actually a few millimeters off perfect, but were a lot straighter then I could do myself.

Action shot with figure:

 I sanded off the rough edges, and painted them with wood primer, which should stop damp getting into them, preventing them warping.

Two of them will feature a river. As that requires depth, the land will slope up to the river, which is not exactly prototypical, but there you go. Here is one, this will feature an island just big enough for one figure to stand on. So far the profile has been defined using strips of card from cereal packets.

At the back, you can just see some grass in the making. the timber merchant were kind enough to give me some sawdust (in fact a bag so big I struggled to carry it). I mixed the sawdust with ready made poster paint to make it green, and in the image above it is drying out.

Scenery Features

My plan for features is to have them free standing, but to leave spaces on the battle board where they can be placed. Each feature uses an old CD as a base, to give it a standard size  and to ensure the base will not warp.

Here are some weird plant-things, made from clay over cardboard tubes, inspired from Morrowind (sorry, out of focus).

The next two are earlier is the process. On the left, a gothic ruin, on the right an orb of power. the orb is a ping pong ball with a couple of LEDs in it.

Here is the gothic ruin with the clay added.